|
Unprotected bridge
structures can deteriorate
over time and are costly
to repair and replace.
STAR Macro DeckŪ was studied
and proven to prevent
damage to concrete
deck structures.
What destroys concrete: |
 |
Major advantages of STAR Macro-DeckŪ
- Superior Grade DOT Tested Formulation
- Penetrates Concrete, Not Another Coating
- Improves flexural and tensile strength of the concrete.
- 100% Acrylic Polymer Concrete Saturant
- Easy to apply, fluid - water like consistency.
- Water based product is safe to handle and easy to store
- Non-flammable
|
|
The irreversible effects of weathering water, deicing salts, and other elements commonly damage concrete.
Deicing salts, used for roads, produce severe spalling, map cracking, crumbling and moderate fracturing of concrete structures. Additionally, deicing salts permeate through
concrete and corrode reinforcing bars (rebars) and thus destroy the load bearing capacity of the overall concrete structure.
Over time, this can lead to the
complete catastrophic structural failure. |
 |
How can concrete be protected?
Concrete can be effectively protected by a specialty treatment of STAR Macro-DeckŪ, that will stop salt penetration and reduce
concrete deterioration by other damaging elements.
STAR Macro-DeckŪ is based on specialty polymers and concrete saturants. It quickly penetrates into concrete surfaces and forms a rubber matrix network inside the physical concrete structure. This rubber matrix network stops water, deicing salts, and other damaging elements.
STAR Macro-DeckŪ maintains the flexural and tensile strength of concrete and can be applied
on new and existing concrete structures. |
- On all types of concrete surfaces.
- Concrete bridge decks, support structures, guard walls.
- Median dividers, curbs.
- Grain elevators.
|
- Sanitary sewer.
- Masonry walls and floors.
- Airport taxiways and aprons.
- Specially formulated to perform on concrete bridge decks.
|
Properties & Specifications:
Resistant to: Deicing salts, hydraulic oils, kerosene, transmission fluid, fat, lubricating oils, grease, etc.
Polymer type: 100% Acrylic polymer
Dilution rate: STAR MACRO-DECK shall be diluted with clean potable water. The amount of water added will vary according to the porosity, age and profile
Application Methods: Spray, roller, or brush.
Coverage Rates: Recommended coverage rate is
200-300 sq. ft/gallon, which may vary depending upon dilution rate and porosity of the surface.
Drying Time: Approx. 30 minutes. Will vary according to ambient temperature and drying conditions. |
|
Package and availability: 5-gal. pails, 55-gal. drums, 275-gal. and
Bulk - Call for Bulk pricing |
|
STA-405005. Macro Deck, 5 Gallon |
|
|
STA-405055. Macro Deck, 55 Gallon |
|
|
STA-405275. Macro Deck, 275 Gallon |
|
|
The Macro-Deck Sprayer is made to easily apply STAR Macro-DeckŪ to Bridge
Decks, Highway Shoulders, and other concrete surfaces.
Heavy Duty framing
allows easy loading with a fork lift onto any truck or trailer. Place the
pick-up tube in the tote or drum and begin protecting new or deteriorating
concrete surfaces in minutes.
Components (all Made In America) Include: |
 |
- Jenny Compressor 8 gal, Honda
GX 160 cc
- Graco Husky 1040 Pump
- Hose reel
- 50' 1/2" Goodyear 200 PSI Hose
|
- 1" Hayward Strainer Assembly
- Hand Wand with Fingertip
Fluid Control
- Pick up tube with end Filter
|
|
EQUMDS. Macro-Deck Sprayer |
|
|
